Breaking News
Loading...
mercredi 5 septembre 2018

Info Post
By Paul Olson


The term hipot is usually used as an abbreviation for high potential. It is a term that is used to refer to a certain class of electrical safety testing instruments referred to as a hipot tester. These instruments are used in the verification of the electrical insulation in finished cables, appliances, and other wired assemblies. Such assemblies include electric motors, transformers, and printed circuit boards just to mention a few.

Upon the manufacture or assembly of an appliance or product, it is usual for some degree of electrical leakage to occur. However, the leakage is usually very low and is brought about by internal capacitance and voltages inside the appliance. It is normal for such leakage to occur and it needs to be expected of every device. There exist a number of instances where the leakage, for some reason, may be excess.

Several causes lead to the excessive current leakage, including flaws in design and break down of internal insulation. Anyone that gets exposed to such faulty devices may be electrocuted from the excessive current leakage. To protect the operator from shock, it is important to conduct a hipot test for verification purposes to ensure that the product has sufficient insulation.

Dielectric Withstanding Voltage (DWV) is another term used in place of the term hipot test. This process involves application of a high voltage between the earth ground shielding and the conductor in the product that carry current. Exposure to excessive voltage causes resultant current flow through the product. A high potential tester is the gadget used in monitoring of this resultant current, which is also called leakage current.

This testing process makes one major assumption. The assumption is that if the insulation of the device is not broken by the deliberate application of excess voltage, then it should be safe for normal operation. The device should be able to withstand application of normal voltage, which is applied during normal use. The name Dielectric Withstanding Voltage comes from this assumption.

The test is aimed at stressing the insulator used in the appliance. Apart from stressing the insulator material, however, the test is additionally used to identify workmanship flaws in the product. The most critical monitored workmanship elements are minute spaces existing between the earth ground and current-carrying conductors. In ordinary environment of operation, shock, humidity, contaminants, shock, and dirt may fill these spaces.

When these small gaps close, the flow of current is enabled. This flow of current can be a major electrical hazard. Prior to product release into the market, it must be tested verify that such hazards cannot occur. The only applicable method that can be used in the detection of this type of defects is DWV. This is true in spite of there being other viable methods.

An electric device that manufacturers use in verification of electrical insulation is a high potential tester. It is made of a source of high voltage, a switching matrix and a current meter. Connection of the source of voltage and the current meter is done by the matrix switch. Including a display and a microcontroller automates the process of testing.




About the Author:



0 commentaires:

Enregistrer un commentaire