Breaking News
Loading...
vendredi 18 juillet 2014

Info Post
By Coleen Torres


Preventive maintenance of electric terminals in your apartment, building, or factory cannot be overlooked. Expert professionals of electrical infrared Los Angeles can be found online or in local directories. Infrared technology is the recommended diagnostic method to detect weak spots in the circuit and switchgear of your building.

The infrared images of the weak spots in the circuits are accurately detected in this survey. Sometimes, the conductor or chord gets worn out, power strips get overloaded, or an electrical appliance starts malfunctioning. Once a hazard goes out of control, it may lead to loss of life, production, and property.

Increased resistance in systems operated by electricity may be caused by loose connections, component age, oxidation, fatigue, wear, or poor installation. The high temperature imager in the camera can clearly show the hottest area in the circuit. It measures the temperature of the hottest area and helps diagnose its health.

Through electromagnetic radiation inspection, incipient defects in the electrical components can be detected and documented. It helps timely repairs of problems before the component fails. Unpredicted failure of any system may also lead to safety hazards and losses in productivity.

Questions may arise about why only some of the connections get hot. The connections heat up only when the resistance increases, but there may be many reasons behind this increase. It may happen due to aging of the component, loose connection, poor installation, fatigue, oxidation, or wear.

If you are able to find these hot spots at the initial stage, you repair them before they fail and cause damages. If you don't, it may lead to catastrophic failure and you may end up losing life, property, and production. In order to prevent these unpredicted failures, annual electrical surveys are recommended.

Early detection of the faulty systems surely lowers risks and prevents catastrophic failures. When all these benefits of preventive maintenance in electrical systems are combined and utilized, the ultimate gain will be rising profits for the industry. This is the reason why most insurance companies ask for an infrared inspection of all electric units.

The electromagnetic radiation survey detects any loose connections, open circuits, overloads, defective equipment, unbalanced load, harmonics, and open circuits. If the weaker connections in these areas are repaired in time, it saves both money and production loss due to unpredicted or unscheduled shutdown.

The survey improves the efficiency of the electrical industry. However, it also helps building owners, facility directors, and property managers take better care of their properties. A skilled thermographer tests all the systems in running condition and report his findings to the management, who then can act accordingly.

The entire system including the distribution panels, switchgear, transformers, sub-feed panels, bus ducts, variable frequency drives, motor control centers, etc. Can be inspected during the survey. To get the maximum benefits of this survey, it is recommended to be carried out annually. It is the most cost-effective predictive maintenance system one can think of, but well worth the price.




About the Author:



0 commentaires:

Enregistrer un commentaire