Breaking News
Loading...
mercredi 24 septembre 2014

Info Post
By Karina Frost


MWD which in full is Measurement While Drilling is measurement taken when drilling on an angle of inclination to the vertical line. These measurements are taken by the MWD Drilling Software. This data is used to produce a 3-D plot of the path of the oil well. This software will transmit crucial information to the operator during operations.

The software transmits information on the direction the well is being drilled. Directional survey can be done by the software and sent in real time. Azimuth and the inclination angle of the drill hole are measured by the magnetometers and accelerometers in it. Immediately information on them has been measured it is transmitted to the surface for analysis

The location of the wellbore can be obtained by data taken at intervals between ten meters to five hundred meters send to the surface. The informative shows the company if the location drilled is or is not within their exploration block. It is not necessary to get this information when you wellhole is being drilled vertically or at a very small angle from the vertical line.

Drilling has to be done is a specific direction or in a directional-drilling. The information that is obtained from the MWD tools guides the driller on steering the process in the direction to the target zone. Bent housing or bent subs aid in directional operations with the MDW providing toolface measurements from the downholde mud motors.

The software sends information about the mechanics of the drill bit. This kind of information include the downhole temperature, mud flow volume, smoothness of rotation, the drillstring speed of rotation, the weight as well as torque on the dril bit. This info will lead to more efficient operations. It also ensures that the tools used won't fail when drilling because they can be operated within their technical specifications. Geologists use this information to understand the formation of the zone being drilled.

MWD tools are able to measure the properties of the formation and send the information to drillers when process is ongoing. The measure of the formation properties can be done by the MWD then sent to the drillers while operation is in progress. This information is basically used in geosteering to the targeted zone. The data obtained varies It is from variants such as porosity, acoustic-caliper, density, inclination at the drill bit and resistivity that this information oscillates.

The internal gamma ray sensor using installed in MWD tools measures the natural gamma rays values at the well. The sensors are inexpensive, compact and are able to take the measurements when working on unmodified drill collars. MWD computer programs cuts the process costs and increases the life-span of the drill bits.

Mud-pulse telemetry method or electromagnetic telemetry are the two methods used to transmit data from the drill bit. The mud valve downhole gives the information in the mud-pulse method, by creating pressure differences when restricting mud flows. The pulse can either be continuous wave, positive or negative pulse.

MWD software analyzes voltage signals transmitted through electromagnetic telemetry method. These voltage signals are generated as a result of altered voltage differences in the lower and upper parts of the electrical insulator in the drillstring. Wires attached to the wellhead and the rod form the electrodes for information transmission.




About the Author:



0 commentaires:

Enregistrer un commentaire