This can be referred to as the technology of mechanically collecting data related to consumption, status and diagnostic from automated devices such as water gauge and energy indicators, this data is then transmitted to central computer or database for trouble shooting and analyzing. The technology has been vastly used to save users the cost of having to travel to specific location to get meter readings. Automated meter reading billing software data is transmitted real time rather instead of using estimations and past data which may not convey accurate information.
This real time data which is then processed to produce meaningful information can be helpful to utility providers and their clients, this is because they can control production and consumption of gas usage and production, water consumption and production and consumption of electric energy.
The first type is the handheld device which is a computerized gadget used record the gauge status and transmitting the data back to central station for analyzing. There is a host computer that uses various software to manipulate data into useful information.
The satellite automated reader will be in touch with installed indicator so as to get the readings, readings are then sent through mobile satellite or fixed network. Narrow band and spread spectrum are mostly used technologies for automated reading for meters.
Another way of data transmission is through the use of power line. This method enables electronic data to be sent through power line to a nearby substation, and then the substation transmits the data back to the central computer located in main office. This is a fixed network.
There exist other advanced that call for special indicators and hardware, these are touch and read where the reader uses a wand to touch the meter and it records automatically. The other one is radio and read where signal is sent directly to wand or laptop and it records meter reading.
Another automated device that is in operation is the use of radio network frequency which comes in many forms. The common ones involve satellite and solutions based on fixed network.
This radio transceiver will send a signal to transmitter booting it up. The transceiver attached to gauge will send radio signal and receive the same. These transmitters can either transmit data one way or use continuous broadcast where the data is sent continuously as it occurs. There is a hybrid system that integrates both two way and one way technologies.
This is not to mean that it does not support a single fixed rate for individual users. Demand billing and time billing are not handled by this program. Automated billing software can perform data logging as well and it advisable for energy providers to consider using them.
This real time data which is then processed to produce meaningful information can be helpful to utility providers and their clients, this is because they can control production and consumption of gas usage and production, water consumption and production and consumption of electric energy.
The first type is the handheld device which is a computerized gadget used record the gauge status and transmitting the data back to central station for analyzing. There is a host computer that uses various software to manipulate data into useful information.
The satellite automated reader will be in touch with installed indicator so as to get the readings, readings are then sent through mobile satellite or fixed network. Narrow band and spread spectrum are mostly used technologies for automated reading for meters.
Another way of data transmission is through the use of power line. This method enables electronic data to be sent through power line to a nearby substation, and then the substation transmits the data back to the central computer located in main office. This is a fixed network.
There exist other advanced that call for special indicators and hardware, these are touch and read where the reader uses a wand to touch the meter and it records automatically. The other one is radio and read where signal is sent directly to wand or laptop and it records meter reading.
Another automated device that is in operation is the use of radio network frequency which comes in many forms. The common ones involve satellite and solutions based on fixed network.
This radio transceiver will send a signal to transmitter booting it up. The transceiver attached to gauge will send radio signal and receive the same. These transmitters can either transmit data one way or use continuous broadcast where the data is sent continuously as it occurs. There is a hybrid system that integrates both two way and one way technologies.
This is not to mean that it does not support a single fixed rate for individual users. Demand billing and time billing are not handled by this program. Automated billing software can perform data logging as well and it advisable for energy providers to consider using them.
About the Author:
You can find an overview of the reasons why you should use automated meter reading billing software at http://www.quikwaters.com right now.
0 commentaires:
Enregistrer un commentaire